Bosch DIP-5042EZ-0HD, Installation Manual

Page: 27 / 46

DIVAR IP 5000 Maintaining the system | en 27
Bosch Sicherheitssysteme GmbH 2016.03 | V1 | DOC
Notice!
We recommend backing up the configuration frequently so that
recent backups are always available if required.
To back up the configuration:
1. In the DIVAR IP configuration, expand System , then click
Service .
2. To back up the configuration, click Back up . A dialog box is
displayed.
3. Click Save . Where the configuration is saved depends on
the browser settings.
Note: If you want to select a specific target directory for
the backup file, click the arrow to the right of the Save
button, then click Save as .
4. To find the backup, click the Windows Start button, enter
downloads
in the search box, then press ENTER.
A dialog box containing the backup file is displayed.
9.4 Adding/replacing hard disks
Observe the following prerequisites when adding or replacing
hard disks.
Prerequisites:
– For RAID configuration, all hard disks of the unit must have
the same capacity
9.4.1 Extending a 2-disk unit
You can extend a unit with additional hard disks.
To add hard disks to a 2-disk unit:
1. Turn off the unit by pressing the power button.
2. Insert the new hard disks into the chassis bay, making sure
that the drive carrier handle is completely closed.
3. Turn on the unit by pressing the power button.