FLEXIDOME IP 3000i IR | FLEXIDOME IP micro
3000i | DINION IP 3000i IR | FLEXIDOME IP turret
3000i IR
Configuration | en
53
Bosch Security Systems B.V.
User manual
2020-01 | V02 | DOC
The progress bar allows monitoring of the transfer. The time remaining is shown by the
message going to reset Reconnecting in ... seconds. When the upload is completed
successfully, the device reboots automatically.
To save the camera settings:
1.
Click
Download
. A dialog box appears.
2.
Enter a password to protect the configuration file.
3.
Enter a file name if required and save the file.
Maintenance log
Download an internal maintenance log from the device to send it to Customer Service for
support purposes. Click
Download
and select a storage location for the file.
4.8.2
Licenses
This window is for the activation of additional functions by entering activation codes. An
overview of installed licenses is shown. The installation code of the unit is also displayed here.
4.8.3
Certificates
This section shows the installed certificates.
Usage list
HTTPS server
Select the default certificate for the HTTPS server.
EAP-TLS client
Select the client for Extensible Authentication Protocol-Transport Layer Security (EAP-TLS).
Note:
The only option may be “None.”
TLS-DATE trusted
Select the trusted certificate for TTLS-DATE.
Stratocast
Select the trusted certificate for Stratocast.
CBS certificates
Select the trusted certificate for CBS.
SYSLOG client
Select the client for SYSLOG.
File list
Add a certificate/file to the file list
Click
Add
.
In the Add certificate window choose either:
–
Upload certificate
to select a file that is already available:
–
Click
Browse
to navigate to the required file.
–
Click
Upload
.
–
Generate signing request
for a signing authority to create a new certificate:
–
Fill in all the required fields and click
Generate
.
–
Generate certificate
to create a new self-signed certificate:
–
Fill in all the required fields and click
Generate
.
Delete a certificate from the file list
Click the trashcan icon to the right of the certificate. The Delete file window appears. To
confirm deletion, click OK. To cancel deletion, click Cancel.
Note
: You can only delete certificates that you have added; you cannot delete the default
certificate.
