FLEXIDOME IP 3000i IR | FLEXIDOME IP micro
3000i | DINION IP 3000i IR | FLEXIDOME IP turret
3000i IR
Configuration | en
35
Bosch Security Systems B.V.
User manual
2020-01 | V02 | DOC
Alarm triggers
Select the alarm type that is to trigger a recording:
–
Alarm input
–
Analysis alarm
–
Virtual alarm
: select one of the sensors that are to trigger a recording, via RCP+
commands or alarm scripts, for example.
Export to account
Select an account from the drop-down box to export to an account. If an account has not yet
been defined, click
Configure accounts
to jump to the
Accounts
page where the server
information can be entered.
Click
Set
to apply the changes.
4.4.3
Maximum Retention Time
Recordings are overwritten when the retention time entered here has expired.
Enter the required retention time in days for each recording track.
Click
Set
to apply the changes.
4.4.4
Recording Scheduler
The recording scheduler allows you to link the created recording profiles to the days and
times at which the camera's images are to be recorded. Schedules can be defined for
weekdays and for holidays.
Weekdays
Assign as many time periods (in 15-minute intervals) as needed for any day of the week. Move
the mouse cursor over the table - the time is displayed.
1.
Click the profile to be assigned in the
Time periods
box.
2.
Click a field in the table and, while holding down the left mouse button, drag the cursor
across all of the fields to be assigned to the selected profile.
3.
Click the
No recordings
profile in the
Time periods
box to deselect the intervals.
4.
Click
Select All
to select all of the intervals to be assigned to the selected profile.
5.
Click
Clear All
to deselect all of the intervals.
6.
When finished, click
Set
to save the settings to the device.
Holidays
Define holidays whose settings will override the settings for the normal weekly schedule.
1.
Click the
Holidays
tab. Days that have already been defined are shown in the table.
2.
Click
Add
. A new window opens.
3.
Select the desired
From
date from the calendar.
4.
Click in the
To
box and select a date from the calendar.
5.
Click
OK
to accept the selection which is handled as a single entry in the table. The
window closes.
6.
Assign the defined holidays to the recording profile as described above.
7.
To delete a user-defined holiday, click on the trashcan of the respective holiday.
Click
Set
to apply the changes.
Time periods
Change the names of the recording profiles listed in the
Time periods
box.
1.
Click a profile.
2.
Click
Rename
.
3.
Enter the new name and click
Rename
again.
