manualshive.com logo in svg

Bosch DICENTIS, Configuration Manual, Page: 16 / 134

Share
Download
Bosch DICENTIS Configuration Manual Download Page 16

16

en | System overview

DICENTIS

2021.06 | V3.7 |

Configuration manual

Bosch Security Systems B.V.

3

System overview

The DICENTIS Conference System is an IP based conference system which runs on an OMNEO
compatible Ethernet network. It is used for distributing and processing audio, video and data
signals.
Refer to the latest “Release notes” for important information.
It is advisable to participate in the DICENTIS Conference System training before you install,
configure, prepare, and operate a DICENTIS Conference System.

Figure 3.1: 

Typical DICENTIS Conference System setup

A typical DICENTIS Conference System consists of:
1.

DICENTIS System server:
–

The heart of the system. It licenses functionality, configures and controls the system.

2.

Client PC:
–

Can be used to: Manage meetings, prepare meetings and configure the system.

3.

Optional video camera (Onvif Profile-S compatible cameras, Sony IP cameras via CGI
commands, or Panasonic HD Integrated IP) + external power supply:
–

Captures the image of a speaking participant.

4.

Ethernet switch:

Summary of Contents for DICENTIS







































































































































Reviews:

No comments