DICENTIS
Hints and Tips | en
119
Bosch Security Systems B.V.
Configuration manual
2021.06 | V3.7 |
–
Select
Change date, time, or number formats
.
–
On the
Formats
tab-page (of Region) configure the
Short date
and
Short time
.
You can also make your own date and time format if you like.
Note
: if you make it too long it will not fit the device.
–
Select
Apply
.
2.
Configure the server that the settings are part of the administrative settings.
–
Open the tab page
Administrative
(of Region).
–
Select the button
Copy settings…
–
Check the box.
–
Welcome screen and systems accounts.
–
Select
OK.
3.
Wait a minute and see that the format on the DCNM-MMD is updated.
14.17
Using a fixed IP address for the DICENTIS server in a DICENTIS
system with ARNI support
In order to use a computer in a DICENTIS system to which you want to assign a fixed IP
address, you make the following settings:
1.
Go to
Control Panel > Network and Internet > View network status and tasks > Change
adapter settings
.
2.
Select “Internet Protocol Version 4”.
3.
Select the
Properties
button.
4.
Use the following IP address:
should contain the IP address of the server or the
computer, the Subnet mask and the Default Gateway.
Use the following DNS server addresses:
should contain the IP address of the ARNI.
5.
Click the
Advanced
button.
6.
The Advanced TCP/IP settings DNS page should contain the following:
–
“Append primary and connection specific DNS suffixes” is checked
–
“Append parent suffixes of the primary DNS suffix” is checked
–
“DNS suffix for this connection: ” parent.bosch.omneo
–
“Register this connection’s addresses in DNS” is checked
–
“Use this connection’s DNS suffix in DNS registration” is checked
Note:
Make sure these settings match the definitions made in your network.
1.
Do a quick test to verify the settings are correct by running the screen command:
C:
\Program Files\Bosch\DNS-SD>BoschDNSSDClient.exe -b _ocasec
If you see a list of DICENTIS registered in the domain “parent.bosch.omneo” it is OK. The
Bosch-ARNI is registered twice, once in the “local” domain and a second time in the
“parent.bosch.omneo” domain, this is normal. If you only see the Bosch-ARNI registered in the
“local” domain, the DNS settings are wrong.
14.18
Selecting a network interface to work with DICENTIS
Using the environment variable, DCNM_PREFERRED_NIC, the interface name, device name (it
is called description if you use the ipconfig command) can be set that you want to be used by
DICENTIS.
1.
Use the Windows Network Connections menu to retrieve the Name or Device name of the
interface.
2.
Create a new environment variable via:
"This PC" \ Properties \ Advanced system settings \ Environment
Variables \ System variables \ New
with variable name:
DCNM_PREFERRED_NIC
.