DICENTIS
System server | en
105
Bosch Security Systems B.V.
Configuration manual
2021.06 | V3.7 |
12
System server
The DCNM-SERVER System server uses standard HP Z2 Mini G4 hardware. Refer to the HP Z2
Mini G4 hardware manuals at
https://support.hp.com/us-en/product/hp-z2-mini-g4-
The DCNM-SERVER2 System server uses standard HP Z2 Mini G5 hardware. Refer to the HP Z2
Mini G5 hardware manuals at
https://support.hp.com/us-en/product/hp-z2-mini-g5-
The DICENTIS System server is delivered with Windows pre-installed and pre-configured with
the DICENTIS software.
i
Notice!
The DICENTIS System server is not marketed as a general purpose computing device (such as
a personal computer) or a general purpose server, or a commercially viable substitute for one
of these systems.
The primary function of the DICENTIS System server is hosting the DICENTIS services.
Additional software added by a third party software provider cannot provide nor replicate the
primary function of the DICENTIS System server.
Connecting to the server PC via Remote Desktop Connection
Use the Remote Desktop Connection application to connect to the server PC and make the
necessary configurations:
1.
Open the Remote Desktop Connection application.
2.
Type the server PC IP address and click Connect.
3.
Enter the user’s password and click OK.
i
Notice!
The default password can be found on the device. For security purposes it is advised to
change the default password to a new password.
While logged into a Remote Desktop session, press the <CTRL> + <ALT> + <END> key
combination. This will launch the task menu on the remote server instead of on your local PC.
Select the Change a password option to change the default password.