en
Troubleshooting
16
9.1 Replacing the LED lights
for DWB068G50I, DW-
B098G50I, DWB068G60I
and DWB098G60I
WARNING
Risk of electric shock!
When changing the bulb, the bulb
socket contacts are live.
▶
Before replacing the bulb, ensure
that the appliance is switched off
in order to prevent a potential elec-
tric shock.
▶
Also unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
WARNING
Risk of injury!
The light emitted by LED lights is very
dazzling, and can damage the eyes
(risk group 1).
▶
Do not look directly into the
switched-on LED lights for longer
than 100 seconds.
Note
Only use bulbs of the same type and
wattage.
1.
Disconnect the appliance from the
power supply.
2.
Loosen and remove the bulb cover
.
3.
Unscrew the bulb and replace it
with a bulb of the same type.
4.
Refit the bulb cover.
5.
Insert the mains plug and switch
on the fuse again.
9.2 Replacing defective LED
lights for DIB098G50I,
DIB128G50I and
DIG098G50I
▶
Defective LED lights may be re-
placed by the manufacturer, their
customer service or a qualified
technician (electrician) only.
