Bosch Compress 3000 DW FI Series, Installation And Operating Instructions Manual

Page: 25 / 32

6 720 809 134 (2013/09) Compress 3000 DW FII
Environmental protection/Recycling | 25
Fig. 39 "Info" function
Displaying the consumption
▶ Call up the "Info" function and press "OK".
The display shows the total consumption (in kWh).
Resetting the consumption
The display shows the total consumption.
▶ Press "-".
"Del" flashes on the display.
Fig. 40 "Del" function
▶ Press "OK".
The counter is reset.
8.8 Fault diagnosis
The appliance is equipped with a system for fault diagnosis.
Malfunctions are displayed on the digital display by means of a
fault code (

Tab. 10, page 28) and a fault symbol (

Fig. 14,
[6]). The fault must be eliminate and the appliance
recommissioned before it is ready for use again. Chapter 11
gives an overview of the faults.
Fig. 41 Fault display with associate fault code
Resetting the fault display
▶ Press and hold the "OK" button for at least 3 seconds.
Fig. 42 Resetting the system
8.9 Default settings
After setting the temperature units and the time, the appliance
adopts the default settings.
• Heating mode: "Combi" (

chapter 8.5)
• Operating mode: "Manual" (

chapter 8.4.1)
• Selected temperature: 50 °C
Fig. 43 Initial menu
9 Environmental protection/Recycling
Environmental protection is one of the fundamental company
policies of the Bosch Group.
Product quality, efficiency and environmental protection are
equally important objectives for us. We comply with all
environmental protection laws and regulations.
In order to protect the environment, we use the latest
technologies and the best materials whilst bearing in mind the
economic implications.
Packaging
Where packaging is concerned, we participate in the relevant
local recycling systems in order to ensure optimum recycling.
All of our packaging materials are environmentally friendly and
can be reused.
6720646160-36.1V
6720646160-42.1V
6720800765-04.1V
menu
-
ok
+
6720646160-21.1V
menu
-
ok
+
> 3 s
6720646160-37.1V