Bosch CIP-5316-JBOD, User Manual

Page: 42 / 68

42 en | User management CIP5000 series storage
2019-10 | V01 | F.01U.380.030 User manual Bosch Security Systems B.V.
4. Click the Create tab in Management View.
5. Enter a user name in the User Name field.
6. Enter the password for this user in the New Password and Retype Password fields.
–
The password is optional. If you do not assign a password, notify this user to leave
the password field blank when he/ she logs into to Management GUI. However, it is
strongly recommended to set a user password.
7. Check the Enabled box to enable this user on this subsystem.
8. Enter a display name in the Display Name field.
–
A display name is optional but recommended.
9. Select a privilege level from the Privilege drop-down menu.
–
For definitions of each privilege level, see the list of user rights below.
10. Click the Submit button.
12.3.1 User rights
– View - Allows the user to view all status and settings, but not to make any changes
– Maintenance - Allows users to perform maintenance tasks, including rebuild, PDM, media
patrol, and redundancy check.
– Power - Allows users to create (but not delete) disk arrays and logical drives, change
RAID levels, change stripe sizes, and change the settings for components such as disk
arrays, logical drives, physical drives, and controllers.
– Super - Allow the user to fully access all functions, including creating and deleting users,
changing other user settings, and deleting disk arrays and logical drives.
–
The default Administrator account is a super user.
12.3.2 Delete a user
There is at least one Super User account. You cannot delete the user account that is currently
log in.
To delete a user:
1.
Log into Management GUI as the Administrator or a Super User.
2. Click the Administrative Tools icon.
3. Click the User Management icon.
4. Click the Delete tab in Management View.
5. Check the box to the left of the user you want to delete.
6. Click the Submit button.
7. Click OK in the confirmation box.
12.4 View network settings
To view network settings for the Ethernet ports, including the port used for access to
Management GUI, click the View Network Settings icon under Administrative Tools.
Information listed for each port includes:
–
Whether the port is enabled/disabled
– Whether the link is up/down
– IP type IPv4/IPv6
– IP address
– Subnet mask
– MAC address
– Maximum port speed