Bosch CAM 847, Initial Start-Up

Page: 29 / 84

1 689 978 508 2011-12-03
|
Robert Bosch GmbH
Software configuration | CAM 847 | 29 en
6. Software configuration
i
If you are using the CRI 846/CRI 846H tester set, the
trigger electronics are already configured. In this case,
please skip this section.
Procedure:
1. Open the EPS945 system software.
 The software initializes the connected devices.
2. Select softkey < F7 > in the “ Main menu ” dialog box.
3. Enter the password:
1958
and confirm with < F12 >.
4. Select the menu item “ Components ” submenu item
“ Devices ” in the “ Configuration " dialog box and
open with < F12 >.
5. In the “ Devices ” dialog box, select the “ CRI800
injector control ” field with u .
6. Open the list box with E .
7. In the list box, select the option “ On ” and accept
with E .
8. Press < F12 > to confirm.
9. Exit the “ Configuration ” dialog box by pressing Esc .
 The system software initializes the connected de-
vices.
"
The status indicator for the CRI 800 trigger electronics
appears in the “
main menu ” dialog box.
7. Rotary encoder setting
7.1 Attaching the trigger electronics
Procedure:
1. Fasten the bracket to the trigger electronics.
4588
23_4p
a
Fig. 19: Fastening the bracket
2. Hook the trigger electronics onto the oil pan of the
KMA.
458823_3pa
Fig. 20: Trigger electronics hooked in place