Bosch BULLS 650-185 Operating Instructions Manual Download

Page: 94 / 238

Operation

6.5.10.1

Grip distance on a SHIMANO ST-EF41 brake lever

Only applies to

ebikes

with this equipment

The brake lever position can be adjusted to the rider's
requirements. Such adjustment does not affect the
pressure point or the position of the

brake pads



Turn setting screw

counter

clockwise

towards

minus

(–).



The brake lever moves closer to the handlebar
grip.



Turn setting screw clockwise towards plus (+).



The brake lever moves away from the
handlebar grip.

Figure 95: Setting screw position (1)

Summary of Contents for BULLS 650-185















































































































































































































































Search results

Summary of Contents for BULLS 650-185

Reviews:

Related manuals for BULLS 650-185

Brands by name

Popular brands

Bosch BULLS 650-185, Operating Instructions Manual

Search results

Summary of Contents for BULLS 650-185

Reviews:

Related manuals for BULLS 650-185

Brands by name

Popular brands