1 691 606 210
2015-07-29
|
Robert Bosch GmbH
40 | BSA 43xx | Symbols used
en
1.
Symbols used
1.1
In the documentation
1.1.1
Warning notices - Structure and meaning
Warning notices warn of dangers to the user or people in
the vicinity. Warning notices also indicate the consequen-
ces of the hazard as well as preventive action. Warning
notices have the following structure:
Warning
symbol
KEY WORD – Nature and source of hazard!
Consequences of hazard in the event of failu-
re to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word
Probability of
occurrence
Severity of danger if inst-
ructions not observed
DANGER Immediate
impen-
ding
danger
Death
or
severe
injury
WAR-
NING
Possible
impending
danger
Death
or
severe
injury
CAUTION
Possible
dangerous
situation
Minor
injury
1.1.2
Symbols in this documentation
Symbol Designation
Explanation
!
Attention
Warns about possible property damage.
i
Information
Practical hints and other
useful information.
1.
2.
Multi-step
operation
Instruction consisting of several steps.
e
One-step
operation
Instruction consisting of one step.
Intermediate
result
An instruction produces a visible inter-
mediate result.
"
Final result
There is a visible final result on com-
pletion of the instruction.
1.2
On the product
!
Observe all warning notices on products and ensure
they remain legible.
2.
User information
2.1
Important notes
Important information on copyright, liability and war-
ranty provisions, as well as on equipment users and
company obligations, can be found in the separate
manual "Important notes on and safety instructions
for Bosch Test Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the BSA 43xx and must always be
heeded.
2.2
Safety instructions
All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Bosch Test Equipment" (user informa-
tion, order number 1 691 696 900). These instructions
must be carefully studied prior to start-up, connection
and operation of the BSA 43xx and must always
be heeded.
2.3
Configuration
!
Only Service personnel are authorized to make all the nec-
essary configuration settings and calibrate the sensors.
2.4
Other applicable documentation
i
These operating instructions do not apply to the
SDL 43xx.
BSA 43xx / SDL 43xx:
Document
Order number
User information
1 691 696 900
Product descriptions
R
BSA 43xx
R
SDL 43x
R
SDL 410
R
Remote control unit
1 691 606 210
1 691 626 210
1 691 636 210
1 691 696 215
Test log book
de / en
1 691 696 600 / 1 691 696 601
Planning folder
de / en
R
BSA 43xx stand alone
(not BSA 436x)
R
BSA 436x stand alone
R
SDL 43x stand alone
R
Testlane SDL 43xx
EU Declaration of Conformity
R
BSA 43xx
R
SDL 43xx
1 689 974 326
1 698 974 328
BSA 44xx:
Document
Order number
User information
1 691 696 900
Product descriptions
R
BSA 44xx
R
Remote control unit
1 691 876 220
1 691 696 215
Test log book
de / en
1 691 696 600 / 1 691 696 601
Planning folder
de / en
905 877 000 / 905 877 001
EU Declaration of Conformity
1 691 876 921
