Bosch BGB6, User Manual

Page: 36 / 368

en
Cleaning and servicing
36
3.
Push the bristle ring down and
lock it in place.
→ Fig.
17
a
The Multi-Use-Brush is ready to
use.
4.
Vacuum using the Multi-Use-Brush.
→
"Starting vacuuming", Page 34
→ "Stopping vacuuming", Page 34
5.
Press the two locking catches on
the bristle ring.
6.
Push the bristle ring upwards and
lock it in place.
→ Fig.
17
7.
Push the floor tool or the tube onto
the Multi-Use-Brush.
8.
Press the release button and re-
move the Multi-Use-Brush to re-
move.
→ Fig.
18
Starting emergency mode
If the Remote-Power-Control handle
does not work, you can vacuum in
emergency mode.
Requirement:
The appliance is in
standby mode.
→
"Switching on the appliance",
Page 34
1.
Press ⁠.
a
The status display goes out and
quickly flashes white three times
after a short time.
2.
Press while the status display is
flashing.
a
The appliance starts in turbo
mode.
Stopping emergency mode
Note:
After vacuuming, check the Re-
mote-Power-Control handle.
→
"Troubleshooting", Page 40
▶
Press ⁠.
a
The status display goes out and
quickly flashes white three times
after a short time.
Removing the appliance
1.
Disconnect the connection
between the floor nozzle and the
telescopic tube.
→ Fig.
19
2.
Disconnect the connection
between the telescopic tube and
the handle.
→ Fig.
20
3.
Press the two locking catches to-
gether and pull the hose out of the
appliance.
→ Fig.
21
Cleaning and servicing
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Cleaning products
Only use suitable cleaning products.
ATTENTION!
Using unsuitable cleaning products
or incorrect cleaning may damage
the appliance.
▶
Do not use harsh or abrasive de-
tergents.
▶
Do not use cleaning products with
a high alcohol content.
▶
Do not use hard scouring pads or
cleaning sponges.
▶
Wash sponge cloths thoroughly
before use.