Bosch BF.7221.1, User Manual And Installation Instructions

Page: 14 / 28

en
Basic settings
14
11 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Notes
¡
Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.
¡
Your changes to the basic settings will be retained
for some time even after a power cut.
Basic settings Selection
Language See options on the appli-
ance
Time "Time" in 24-hour format.
Display Selection
Brightness
¡
Levels 1 to 8
1
Standby screen
¡
Clock displayed, for
set time
1
¡
Don't display
Clock
¡
Digital
1
¡
Analog
Adjustment
¡
Adjust display horizont-
ally and vertically
1 Factory setting (may vary according to model)
Sound Selection
Button tone
¡
On
1
¡
Off
Signal tone
¡
Very short
¡
Short duration
¡
Medium duration
1
¡
Long duration
1 Factory setting (may vary according to model)
Appliance settings Selection
Illumination
¡
On
1
¡
Off
Microwave output selec-
tion
¡
90 W
¡
180 W
¡
360 W
¡
600 W
¡
boost
1 Factory setting (may vary according to model)
Customisation Selection
Brand logo
¡
Display
1
¡
Don't display
Operation after switch-on
¡
Main menu
1
¡
Microwave
¡
Meals
Elapsed cooking time
¡
Display
1
¡
Don't display
Childproof lock
¡
Available
¡
Deactivated
1
Factory setting (may vary according to model)
Factory settings Selection
Factory settings
¡
Restore
¡
Cancel
Demo mode
¡
Demo mode
(only displayed during
the first 5 minutes after
the appliance has
been reset or during
initial operation)
Appliance information
¡
Appliance information
11.2 Changing the basic settings
Requirement:
The appliance is switched on.
1. Press "Basic settings".
2.
Press the required basic setting.
3. Change the required settings on the display.
4.
Use ​⁠ to return to the overview or go back to the
main menu.
11.3 Changing the time
Requirement:
The appliance is switched on.
1.
Press "Basic settings".
2.
Press basic setting "Time".
a
The display shows the set value.
3.
Use the setting ring to set the hours.
4.
Press the minutes.
5.
Use the setting ring to set the minutes.
6.
Press ​⁠.
7.
Use ​⁠ to return to the overview or go back to the
main menu.