Childproof lock
en
13
2.
To change the preset end time, press the relevant
time value.
a
The selected value is marked in blue.
3.
Use the setting ring to set the end time.
4.
Press .
5.
Press .
a
The display shows the start time. The appliance is in
standby mode.
a
Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
a
When the cooking time has elapsed, a signal
sounds. A message appears on the display confirm-
ing that the operation has finished.
6.
Once the cooking time has elapsed, perform one of
the following actions:
‒
If required, you can select other settings and re-
start the operation.
‒
When the food is ready, use to switch the ap-
pliance off.
Changing the end time
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
1.
Press "End".
2.
Use the setting ring to set the end time.
If required, use to reset the setting value.
3.
Press .
Cancelling the end time
1.
Press "End".
2.
Reset the setting value with .
3.
Press .
9.3 Setting the timer
The timer runs independently during the operation. You
can set the timer for a time up to 24 hours. The timer
has its own signal so that you can tell whether it is the
timer or a cooking time that has elapsed.
1.
Press .
2.
To set the timer, press the relevant time value on
the display, e.g. minute display "m" or second dis-
play "s".
a
The selected value is marked in blue.
3.
Set the timer using the setting ring.
a
If required, use to reset the setting value.
4.
To start the timer, press .
a
The timer counts down.
a
The timer remains visible on the display if the appli-
ance is switched off.
a
When the appliance is switched on, the display
shows the settings for the current operation. The
timer is displayed in the status display.
a
Once the timer has elapsed, a signal sounds. A no-
tification appears on the display confirming that the
timer has finished.
Ending the timer
Requirement:
A signal sounds.
▶
Press any field.
a
The timer is switched off.
Changing the timer
You can change the timer at any time.
1.
If the timer is running in the background, use to
select the timer beforehand.
2.
Press .
3.
Change the timer using the setting ring.
4.
Press to confirm.
Cancelling the timer
You can cancel the timer at any time.
1.
If the timer is running in the background, use to
select the timer beforehand.
2.
Press .
3.
Reset the timer using .
10 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
10.1 Activating the childproof lock
▶
Press and hold for approx. 4 seconds.
a
The controls are locked.
a
If a timer duration has been set, this continues to
count down. While the childproof lock is active, the
timer duration cannot be changed. Signal tones,
e.g. when the timer duration has elapsed, can be
ended by pressing any button.
10.2 Deactivating the childproof lock
1.
Press and hold for approx. 4 seconds.
2.
The controls are unlocked.
Summary of Contents for BF.7221.1
Page 27: ......
