Basic settings
en
13
Cooking food using the combi cooking
programme
1.
Take the food out of its packaging.
2.
Weigh the food.
You require the weight in order to set the pro-
gramme.
3.
Place the food in microwave-safe, heat-resistant
cookware that is not too big.
4.
5.
Once the programme has finished, leave the food to
rest for another 5–10 minutes to allow the temperat-
ure to even out.
11 Basic settings
You can configure the appliance to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Setting
Selection
Meaning
Button tone
1
Switch on the button tone.
Button tone
Switch off the button tone.
Note:
The button tone remains active for
and
.
Demo mode
Activate or deactivate demo mode.
Note:
The appliance is switched off. You can use the buttons and the display,
the buttons do not work. Demo mode is mainly useful for dealers.
1
Factory setting (may vary according to model)
11.2 Changing basic settings
Requirement:
The appliance is switched off.
1.
Press and hold
and
for a few seconds.
a
The display shows the first basic setting.
2.
Press
.
a
The current value flashes on the display.
3.
Set the desired value with the rotary selector.
4.
Press
.
a
The appliance implements the setting.
5.
Press
.
Tip:
The setting can be changed at any time.
11.3 Changing the signal duration
When your appliance is switched off, you hear an aud-
ible signal. You can change the duration of the signal.
▶
Press and hold
for approx. six seconds.
a
The signal duration switches between short and
long.
a
The appliance applies the signal duration and dis-
plays the time.
11.4 Setting the time
Note:
After connecting the appliance to the power or
following a power cut, a signal sounds and several
zeros are shown on the display. It may take a few
seconds until a signal sounds and you can set the
time.
1.
Press .
a
12:00 is shown on the display. The indicator light
lights up via .
2.
Set the clock using the rotary selector.
3.
Press .
11.5 Hiding the clock
To reduce the standby consumption of your appliance,
you can hide the clock.
1.
Press .
2.
Press
.
To view the clock, press again.
12 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
12.1 Cleaning products
Only use suitable cleaning products.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
Do not use harsh or abrasive detergents.
▶
Do not use cleaning products with a high alcohol
content.
