Bosch BE.7321.1M, User Manual And Installation Instructions

Page: 11 / 32

Microwave combi mode
en
11
¡
Observe the instructions on how to prevent material
damage. →
Page 6
¡
Observe the information on microwave-safe cook-
ware and accessories.
1.
In the menu press "Microwave".
‒
Or select the microwave directly using the touch
field ​⁠.
2.
Press the microwave output in watts.
3.
Use the setting ring to set the microwave output.
4.
To confirm the microwave output, press ​⁠ on the
display.
5.
Press ​⁠ "Cooking time".
A cooking time must always be set to operate the
microwave.
6.
To change the preset cooking time, press the relev-
ant time value, e.g. minute display "m" or second
display "s".
a The selected value is marked in blue.
7.
Use the setting ring to set the cooking time.
If required, use ​⁠ to reset the setting value.
8.
To confirm the set cooking time, press ​⁠.
9. Press ​⁠ to start the operation.
a
The microwave starts and the cooking time counts
down. At the maximum microwave power "boost" ,
the display shows the power reduction.
a When the time has elapsed, a signal tone sounds. A
message appears on the display confirming that the
operation has finished.
10.
Once the cooking time has elapsed:
‒
If required, you can select other settings and re-
start the operation.
‒
When the food is ready, use ​⁠ to switch the ap-
pliance off.
11.
Dry the cooking compartment.
Tip:
To ensure optimum use of your appliance, you can
refer to the information in the recommended settings.
→
"How it works", Page 21
8.5 Changing the microwave output
You can change the microwave output setting during
operation.
1.
Press ​⁠.
2.
Press the set microwave output setting.
3.
Use the setting ring to set the microwave output.
4.
Press ​⁠.
8.6 Changing the cooking time
1. Press ​⁠.
2.
Press the set "Cooking time".
3. To change the preset cooking time, press the relev-
ant time value, e.g. minute display "m" or second
display "s".
a
The selected value is marked in blue.
4. Use the setting ring to set the cooking time.
If required, use ​⁠ to reset the setting value.
5. Press ​⁠.
8.7 Extending the cooking time
Once the cooking time has elapsed, you can continue
cooking the meal.
1.
Press "Continue cooking".
2.
Set the required cooking time.
→
"Setting the cooking time", Page 15
You can reset the set cooking time using ​⁠.
3.
Press ​⁠.
4.
Use ​⁠ to start the operation.
8.8 Pausing the operation
1. Open the appliance door or press ​⁠.
a
Operation is paused.
2. To continue operation, close the appliance door and
press ​⁠.
a Operation continues.
8.9 Cancelling the operation
▶
Press ​⁠.
a The appliance stops any ongoing functions.
9 Microwave combi mode
To reduce the cooking time or if you want to heat and
brown foods at the same time, you can use the grill in
combination with the microwave.
The following microwave output settings are available
to choose from:
¡
90 W
¡
180 W
¡
360 W
9.1 Setting added microwave
Requirement:
The appliance is switched on.
1.
Press "Grill".
2.
Press "Level".
‒
Use the setting ring to select the required grill
setting.
‒
Press ​⁠.
3.
Press "MW function".
‒
Use the setting ring to select the required mi-
crowave output.
‒
Press ​⁠.
a
A preset cooking time appears on the display.
4.
If you want to change the preset cooking time,
press "Cooking time".
‒
Use the setting ring to select the required cook-
ing time.
‒
Press ​⁠.
5.
If an end time is required, press "End".
‒
Use the setting ring to select the required time.
‒
Press ​⁠.
6. Use ​⁠ to start the operation.
a
An audible signal sounds once the cooking time
has elapsed.