![background image](http://html.mh-extra.com/html/bosch/b465/b465_installation-and-operation-manual_38832037.webp)
Conettix Universal Dual Path Communicator
Configuration and Diagnostics | en
37
Bosch Security Systems, Inc.
Installation and Operation Manual
2017.11 | 05 | F.01U.311.207
6
Configuration and Diagnostics
You can configure the B465 using an internal interface, a USB connection, and TerraTerm, or
you can use RPS with a local or remote connection.
6.1
RPS
Before you can use RPS (Remote Programing Software) to configure the B465 you must
download and install the software on your Windows computer. Refer to the RPS product page
on the Bosch Security Systems website.
You can connect to the B465 with RPS on site or remotely.
6.2
USB and TeraTerm
You can use a USB connection from a laptop PC to the B465 to configure the B465 on-site.
The supported USB cable used to establish connection is a Male A to Male A cable.
Notice!
Use the Bosch B99 USB direct connect cable (F01U278853)
Failure to do so may result in communication failures between the B465 and your computer.
Notice!
USB connection is for configuration or diagnostics only
Disconnect when done.
Notice!
Driver supplied with B465 firmware v1.00 is not compatible with firmware v2.00
The B465 driver, RB_465.inf, is not compatible with B465 firmware v2.00.
Before you can access the USB user interface, you must install or browse to the RBUS1CP.inf
file on the target PC or laptop.
The B465 USB driver (RBUS1CP.inf) file is available on the supplied user CD. You need to
install this file only once on the target computer.
Installing the driver from the web:
1.
From your Internet browser, go to
:
http://www.boschsecurity.com to open the Bosch
Web site.
2.
Select the web site for your region and country.
3.
In the Online Catalogs section on the left, click the Intrusion Alarm Systems link.
4.
Under the Intrusion Alarm Systems Products heading, scroll to the
Conettix
-
Information
Transport
Solutions section. Click the
Show
product
section
link.
5.
Click the Conettix
IP link.
6.
Scroll to the B465 Conettix Universal Dual Path Communicator section. Click the section
title to open the product page.
7.
Under the product image, click the Software tab.
8.
Click OK to accept the license agreement.
9.
To the right of the B465, click on the language link (for example, en).
The
File
Download dialog box opens.
10. Click Save to save the file to the target computer. Perform this task to download the
B465 USB driver file (RBUS1CP.inf file and RBUS1CP.cat files).
11. Supply power to the B465.
Summary of Contents for B465
Page 1: ...Conettix Universal Dual Path Communicator B465 en Installation and Operation Manual ...
Page 2: ......
Page 114: ......