![background image](http://html.mh-extra.com/html/bosch/b465/b465_installation-and-operation-manual_38832013.webp)
Conettix Universal Dual Path Communicator
System overview | en
13
Bosch Security Systems, Inc.
Installation and Operation Manual
2017.11 | 05 | F.01U.311.207
You can configure the B465 to remove the phone line voltage when there is a communication
failure between the B465 and the central station receiver. Removing the phone line voltage
causes a communication trouble (phone line trouble) to occur at the control panel.
3.3
IP communication
The B465 uses its built-in Ethernet connection, and a Conettix Plug-in cellular module (B44x)
to send reports to the central station receiver. The system routes event reports to the primary
and secondary destinations using Ethernet or cellular communication, depending on
configuration.
3.4
B46 overview (optional)
The B46 is an optional module that provides external B465 LED and sounder status when
installed in a supported enclosure. The module has 3 LEDs (System Trouble, Power, and
Battery) which illuminate through the B46 LED cover. The LED cover snaps into a knockout in
the enclosure door. The B46 fits in the B10/B10R, D8103 enclosure. Refer to the following
figure for component locations.
BOSCH
1
5
3
2
4
6
Figure
3.3: B46 module overview
Callout
ー
Description
1
ー
Sounder
2
ー
SYSTEM TROUBLE LED
3
ー
POWER LED
4
ー
BATTERY LED
5
ー
3-hole mounting pattern
6
ー
B46/B465 cable connection
Summary of Contents for B465
Page 1: ...Conettix Universal Dual Path Communicator B465 en Installation and Operation Manual ...
Page 2: ......
Page 114: ......