manualshive.com logo in svg

Bosch B3512, Owner'S Manual

Share
Download
Bosch B3512 Owner'S Manual Download Page 47

12.3 Status indicators overview

The Status indicators on the keypad provide a quick visual
reference for you to see how your system is operating.

Ready to arm. The green checkmark indicates whether
the system is ready to turn on (arm).

 

– ON Steady. All points are normal and the system is

ready to turn on.

 

– OFF. One or more points are faulted, and the system

is not ready to turn on.

On (armed). The red lock indicates whether the system
is on (armed).

 

– ON Steady. All areas are on with no alarms.

 

– Flashing. All areas are armed, and there is an active

alarm.

 

– OFF. One or more areas are off.

Trouble. The yellow caution lights when a trouble
condition exists.

 

– ON Steady. There is a system, device, or point

trouble.

 

– OFF. There are no system, device, or point troubles.
 

Control Panels

B93x keypad operation overview | en

47

Bosch Security Systems, Inc.

 

2015.01 | 02 | F.01U.307.371

Summary of Contents for B3512





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands