manualshive.com logo in svg

Bosch B3512, Owner'S Manual

Share
Download
Bosch B3512 Owner'S Manual Download Page 187

28 B92x/B91x Settings menu

Use the Settings menu to turn Watch mode on or off, set the
system date and time, view and change schedules, set keypad
brightness and volume, and show the time in the keypad display.

28.1 Watch Mode

You can use Watch Mode to monitor select points with the
security system turned off. Each time points are faulted (door or
window is opened), the keypad chimes once and shows the point
text for 60 seconds. The control panel does not generate alarms
in this mode except 24-hour alarms (fire, panic, etc.).
 
Use this function in residential systems to monitor entries or
exits in your home. In commercial systems it can serve as a door
chime to alert you when a customer or delivery person enters
your business.

 

Control Panels

B92x/B91x Settings menu | en 187

Bosch Security Systems, Inc.

 

2015.01 | 02 | F.01U.307.371

Summary of Contents for B3512





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands