manualshive.com logo in svg

Bosch B3512, Owner'S Manual

Share
Download
Bosch B3512 Owner'S Manual Download Page 167

26.8 Access menu

 
Use the Access menu to control doors.
 
When you open Access menu options and the desired door
number, the keypad shows the door state.

State

Meaning

Cycling

The cycle door function is running (door can be
opened during the cycle function).

Unlocked

The door is unlocked (you do not need to activate
a door request or present a valid credential).

Secure

The door is secured (door cannot be opened when
secured, even if you present a valid credential).

Fail

The door is in a failed state. Call your security
company.

Locked

The door is locked (door can be opened by
presenting a valid credential).

 
This feature is:

 available on my system.

 unavailable on my system.

 

Control Panels

B92x/B91x Actions menu | en 167

Bosch Security Systems, Inc.

 

2015.01 | 02 | F.01U.307.371

Summary of Contents for B3512





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands