56
en | Maintenance and service
AVENAR panel
2022-07 | 5.0 | F.01U.378.910
System manual
Bosch Sicherheitssysteme GmbH
6
Maintenance and service
In Germany, maintenance work and inspection work on security systems are governed by the
regulations of DIN VDE 0833. These regulations stipulate reference to the manufacturer’s
instructions for maintenance intervals.
i
Notice!
Have maintenance and inspection work carried out regularly by trained, qualified personnel.
Bosch recommends a functional and visual inspection at least once a year.
!
Warning!
Live components and stripped cable! Risk of injury from electric shock. The system must be
current-free during connection work.
!
Warning!
Risk of overheating
Check regularly that ventilation gaps are not blocked by e.g. dust. Clean if necessary with a
vacuum cleaner.
i
Notice!
Touchscreen recalibration is required to be performed at least once a year. Otherwise
operating the device may be difficult or even not possible without prior re-calibration. For
further information, see the necessary procedure in the user guide.
Clean the touch screen and surfaces with a slightly damp soft cloth only. Do not use any
cleaning agents and make sure that no liquid enters the inside of the device.
Warranty
Defective devices are exchanged free of charge in the case of a claim under the warranty.
!
Warning!
Opening the controller or the modules can result in damaging the device. Opening the device
will be recognized and results in the loss of warranty.
i
Notice!
Do not remove the security labels. This will void the warranty.
Repair
In the event of any defect, the entire device is exchanged.
Disposal
Unusable electrical and electronic devices must not be disposed of with
normal household waste. They must be disposed of in compliance with the
applicable regulations and directives (e.g. WEEE in Europe). See
www.boschsecurity.com/xc/en/weee/ for further information.