manualshive.com logo in svg

Bosch AVENAR panel, System Manual, Page: 11 / 76

Share
Download
Bosch AVENAR panel System Manual Download Page 11

AVENAR panel

AVENAR panel series | en

11

Bosch Sicherheitssysteme GmbH

System manual

2022-07 | 5.0 | F.01U.378.910

2.2

Panel controller

The panel controller is the central component of the fire panel. All messages are shown on the
color display. The entire system is operated via a touch screen. The user-friendly user interface
adapts to various situations. This allows correct operation that is both simple and clear as well
as targeted and intuitive.
The FSP-5000-RPS programming software enables adaption to project- and country-specific
requirements.

Software licenses

The panel controller is delivered with a hard coded software license. This software license is
implemented during production and cannot be modified, revoked or transported. The license
defines the maximum panel network size and availability of certain features and interfaces. In
total 4 different licenses are available.

AVENAR panel
2000, standard
license

AVENAR panel
2000, premium
license

AVENAR panel
8000, standard
license

AVENAR panel
8000, premium
license

Ethernet interface to

Building management
system (BIS, FSM-5000-
FSI)

•

•

UGM-2040 Hierarchy
panel

•

•

Voice alarm system
(Smart Safety Link)

•

•

Monitoring and control

Status overview

•

•

•

•

Simultaneous control

•

•

•

•

Individual control

•

•

Modularity (maximum number)

LSN 0300 A modules

4

4

32

32

LSN 1500 A modules

0

0

11

11

Functional modules
(including LSN modules)

6

6

46

46

Panel redundancy

Redundant panel
controller

•

•

Keypad as redundant
panel controller

•

•

Network

Panel network

remote
keypads

panels, remote
keypads,
servers

panels, remote
keypads

panels, remote
keypads,
servers

Summary of Contents for AVENAR panel













































































Reviews:

No comments