64
en | Maintenance
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2020-07 | 3.0 | F.01U.378.877
User Guide
Bosch Sicherheitssysteme GmbH
Notice!
In the
HVAC
element category, the
Auto
function field is also offered. Select this function
field to assign automatic mode to a fan, for instance.
14.4
Activate Transmission Device
To activate a transmission device:
1.
In the start menu, select
Maintenance
2.
Activate transmission device
A list of the elements is displayed. Refer to
Working with lists, page 24 for information on
how to navigate through a list.
3.
Select the required list fields.
The list fields are marked.
4.
Select
On
.
The selected transmission devices are activated.
To end activation of the selected elements:
1.
In the start menu, select
Maintenance
2.
Activate transmission device
3.
Select the list fields of the activated transmission devices.
4.
Select
Off
.
The transmission devices are no longer activated.
14.5
Bypassing/Un-bypassing buzzer
In order to prevent an acoustic warning tone being sent to the panel during maintenance
work, for example, the panel's internal buzzer can be permanently bypassed.
To bypass the internal buzzer, select the following from the start menu:
1.
Maintenance
2.
Bypass buzzer
The buzzer is bypassed and the text on the user interface changes to
Unbypass buzzer
.
To remove the bypass from the buzzer, select
Unbypass buzzer
in step 2.
Notice!
If you switch the internal buzzer off permanently, no acoustic signal will sound on the panel in
the event of an alarm or fault!
