Bosch AUTODOME IP starlight 5100i, User Manual

Page: 13 / 80

AUTODOME IP starlight 5100i Operation via the browser | en 13
Bosch Security Systems
User Manual
2020-11 | draft 0.9 |
– Saving begins immediately. The red dot on the icon indicates that a recording is in
progress.
2. Click the recording icon again to stop recording.
3.1.12 Video Security App
Start Video Security app
To start the Video Security app, click .
3.1.13 Show latest event
Click the Show latest event icon to watch the last recorded important event.
The Playback page opens.
3.1.14 Audio communication
Audio can be sent and received via the Live page if the unit and the computer support audio.
1. Press and hold the F12 key on the keyboard to send an audio signal to the unit.
2. Release the key to stop sending audio.
All connected users receive audio signals sent from the unit but only the user who first
pressed the F12 key can send audio signals; others must wait for the first user to release the
key.
3.1.15 Storage, CPU and network status
When you access the unit with a browser, the icons in the list that follows are at the top right
corner of the window:
– CPU load icon
– Network load icon
The information from the icons can help with solving problems with the unit or with fine-
tuning the unit.
Hover over the CPU load icon to see the CPU load. If the CPU load is too high, change the
VCA settings.
Hover over the Network load icon to see the network load. If the network load is too high,
change the encoder profile to reduce the bitrate.
3.1.16 Status icons
Various overlays in the video image provide important status information. The overlays provide
the following information:
Decoding error
The frame might show artifacts due to decoding errors.
Alarm flag
Indicates that an alarm has occurred.