Bosch AUTODOME IP starlight 5000i NDP?5512?Z30C, Installation Manual

Page: 12 / 30

12 en | Preparing the Camera AUTODOME IP starlight 5000i
2019-03 | 1.2 | Installation Manual Bosch Security Systems
5 Preparing the Camera
Note : For pendant models, use T15.
For in-ceiling models, use T10.
1. Loosen the three (3) Hex screws in the trim ring / bubble enclosure with the appropriate
Torx screwdriver.
2. Remove the trim ring / bubble enclosure.
3. Remove the foam insert that protects the camera block.
4. Remove the tape holding the plastic lens protector; remove the lens protector.
2.
3.
4.
5.
1.
3×
T10