AMC MUX and AMC MUX-EXT
Connection Instructions | en
23
Bosch Security Systems
Installation manual
F.01U.012.855 | V.3 | 2006.08
Settings of the operation mode
Open the box to change the settings. Unlock the box on both
sides and remove the PCB from the housing.
Fig. 6.3
Opening the AMC MUX and settings
The module operates in DCE (Data Communication Equipment,
standard setting) and the DTE mode (Data Terminal Equip-
ment), depending on the jumper settings.
The AMC MUX module supports flow control lines (CTS/RTS).
In some applications, reversing the flow control signals is
required. Auto mode (= automatically changing between send
and receive mode) is the default. All three modes are selectable
using the DIL switches. Refer to the table below.
Summary of Contents for AMC MUX
Page 1: ...AMC MUX and AMC MUX EXT ACX AMC MUX ACX AMC MUXE en Installation manual ...
Page 2: ......
Page 31: ......
