Bosch 853/7441 User Manual And Installation Instructions Download Page 39

Page: 39 / 64

Basic operation

Push in the detergent drawer.

Starting the programme

Note:

If you want to change the time

until the programme ends, set the
"Ready in" time first.

▶

Press

Start/Reload

The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.

The display shows either the pro-
gramme duration or the "Ready in"
time.

After the programme has ended,
the display shows:

End

Adjusting the "Ready in" time
before the programme starts

You can readjust the selected "Ready
in" time before the programme starts.

Press

Start/Reload

Press

Finish in

repeatedly until the

display indicates the desired
"Ready in" time.

Press

Start/Reload

Soaking laundry

You can soak the laundry before
washing in the appliance by pausing
the programme.

Note:

No additional detergent is re-

quired. The washing solution is then
used for washing.

Start the programme.

To pause the programme, after ap-
prox. 10 minutes, press

Start/Re-

load

To resume the programme, after
the desired soaking time, press

Start/Reload

Adding laundry

Note:

Please read the information in

the Safety →

sections

to ensure that you use the appliance
safely.

Press

Start/Reload

The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
→

"Display", Page 26

Add or remove laundry.

Close the door.

Press

Start/Reload

Cancelling the programme

Once the programme has started,
you can cancel it at any time.

Note:

Please read the information in

the Safety →

sections

to ensure that you use the appliance
safely.

Press

Start/Reload

Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start

the

Rinse

programme.

– If the water level is high: Start

the

Spin

Drain

programme.

Remove the laundry.

Resuming the programme when
the programme status is Rinse
Hold

Set the

Spin

Drain

programme.

Press

Start/Reload

Summary of Contents for 853/7441

































































Search results

Summary of Contents for 853/7441

Reviews:

Related manuals for 853/7441

Brands by name

Popular brands

Bosch 853/7441, User Manual And Installation Instructions

Search results

Summary of Contents for 853/7441

Reviews:

Related manuals for 853/7441

Brands by name

Popular brands