Bosch 3448, Original Instructions Manual, Page: 7 / 200

1 General Information
Product name: Lifting tackle
Product type: Load holding device
Product number: 3448
Weight: 24.3 kg
Max. load capacity: 500 kg (see the “Load cases”
table)
Static test coefficient: 3.0
Intended Use:
The lifting tackle serves for lifting of engine and
gearbox units in connection with the workshop
crane VAS 6100.
Terms of Use:
Only for qualified workshop personnel.
Only use the load holding device for work approved
by the Volkswagen Group.
Use only for loads up to according to the “load
cases” table.
The lifting tackle 3448 may only be used in
connection with a suitable workshop crane (e.g. VAS
6100) and only with accessories approved by the
Volkswagen Group.
Do not hold or lift any persons or animals.
Do not hold or lift articles other than described in
the workshop manuals of the Volkswagen Group
brands.
Do not stand under suspended loads.
Only use on level, horizontal and weight-bearing
ground.
Only use in connection with the approved
accessories (see workshop manuals of the
Volkswagen Group brands).
Do not work on suspended loads.
Figure 1: Lifting tackle 3448
1 Base support
2 Interior hexagon screw M8x16 - 8.8, galvanised
3 Support with load hook transverse
4 Support with load hook longitudinal
5 Shackles
Load cases
Application: Maximum load capacity:
Base support 500 kg
Support with load
hook transverse
(position 3)
150 kg/piece
Support with load
hook longitudinal
(position 4)
268 kg/piece
en | 7 | 3448
2018-06-18 Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany