SCD110 Operating Instructions v2.0
17 | 27
Data subject not change without notice | Printed in Germany | September 20 | Version 1.0
BCDS/GM
5.8
Logging and Transferring the Data
The
function stores raw data in the SCD internal memory. Data can be transmitted to the smartphone
via SCD app or to the gateway over the BLE.
The logging settings can be configured by tapping on the Logging icon.
Set the desired sampling rates for each sensor which should be used by data logging.
Leave the sensors “Disabled”, if you don’t want to get data from them in the log file.
Tap on "Start logging".
