manualshive.com logo in svg

Bosch 22-15-2061, Translation Of Original Operating Instructions, Page: 207 / 299

Share
Download
Bosch 22-15-2061 Translation Of Original Operating Instructions Download Page 207

MY22Z0a - 12_1.0_25.07.2022

206

Cleaning, servicing and inspection

7.5.10 Checking the riding light

1

Check the cable connections on the headlight 
and rear light for damage and corrosion and 
ensure they are firmly in position. 

If cable connections are damaged or corroded, 
or are not firmly in positioned. take pedelec out 
of service. Contact specialist dealer. 

2

Switch light on.

3

Check that the headlight and rear light come 
on.

If the headlight or rear lights do not come on, 
take pedelec out of service. Contact specialist 
dealer. 

4

Place pedelec 5 m from the wall. 

5

Stand the pedelec up straight. Hold the 
handlebars straight with both hands. Do not 
use the kickstand.

Figure 228:  Light positioned too high (1), correctly (2) and too low (3)

6

Check the position of the light beam.

If the light is positioned too high or too low, 
adjust riding light (see Section

6.5.18

).

I

II

III

1

2

1

2

1

2

Summary of Contents for 22-15-2061












































































































































































































































































































Reviews:

No comments