manualshive.com logo in svg

Bosch 22-15-2061, Translation Of Original Operating Instructions, Page: 183 / 299

Share
Download
Bosch 22-15-2061 Translation Of Original Operating Instructions Download Page 183

MY22Z0a - 12_1.0_25.07.2022

182

Cleaning, servicing and inspection

7.1.9

Checking the suspension seat post

Deflect and let the suspension seat post 
rebound. 

If you hear unusual noises when the 
suspension seat post deflects and rebounds, 
or it yields without any resistance, take pedelec 
out of service. Contact specialist dealer. 

7.1.10 Checking the bell

1

Press the bell button downwards.

2

Let button spring back.

If you do not hear a clear, distinct ring of the 
bell, replace bell. Contact specialist dealer.

7.1.11 Checking the handles

Check the handles are firmly in place.

Screw loose handles firmly into place.

7.1.12 Checking the USB cover 

If featured, check the position of the 

cover on 

the USB port

 on a regular basis and adjust if 

necessary.

7.1.13 Checking the riding light

1

Switch light on.

2

Check that the headlight and rear light come 
on.

If the headlight and rear lights do not come on, 
take pedelec out of service. Contact specialist 
dealer.

7.1.14 Checking the brake

1

Pull both handbrakes when stationary.

2

Push the pedals.

If no resistance is generated in the 
handbrake’s usual position, take pedelec out of 
service. Contact specialist dealer.

If the brake is losing fluid, take pedelec out of 
service. Contact specialist dealer. 

Summary of Contents for 22-15-2061












































































































































































































































































































Reviews:

No comments