manualshive.com logo in svg

Bosch 22-15-2061, Translation Of Original Operating Instructions, Page: 159 / 299

Share
Download
Bosch 22-15-2061 Translation Of Original Operating Instructions Download Page 159

MY22Z0a - 12_1.0_25.07.2022

158

Operation

6.6.6

Pannier rack 

The specialist dealer will advise on choosing a 
suitable pannier rack. 

The specialist dealer must install the pannier rack 
the first time to ensure that it is safely fitted. 

When installing a pannier rack, the specialist 
dealer makes sure that the fastening mechanism 
is suitable for the pedelec and that all components 
are installed and firmly fastened. They will also 
ensure that shift cables, brake cables, hydraulic 
lines and electrical cables are adjusted as 
necessary, the person riding has optimum 
freedom of movement and the pedelec’s 
maximum permitted total weight is not exceeded. 

The specialist dealer will provide instruction on 
how to handle the pedelec and the pannier rack. 

6.6.7

Panniers and cargo boxes

Use a paint protection film when attaching 
panniers. This will reduce abrasion on paint 
and wear on components. 

Summary of Contents for 22-15-2061












































































































































































































































































































Reviews:

No comments