manualshive.com logo in svg

Bosch 22-15-2061, Translation Of Original Operating Instructions, Page: 150 / 299

Share
Download
Bosch 22-15-2061 Translation Of Original Operating Instructions Download Page 150

MY22Z0a - 12_1.0_25.07.2022

149

Operation

6.5.17.2 Adjusting the RockShox compression adjuster

Only applies to pedelecs with this equipment

Figure 166:  Position and shape of the compression adjuster (blue) depends on the model

1

Set the 

compression adjuster

 to the middle 

position.

2

Ride the pedelec over a small obstacle.

Turn 

compression adjuster

 clockwise.

The damping and compression hardness is 
increased. The deflection stroke speed is 
reduced. 

Turn 

compression adjuster

 anti-clockwise.

The damping and compression hardness is 
reduced. The deflection stroke speed is 
increased. 

3

The ideal setting for the rebound damper has 
been achieved when the rebound movement of 
the rear wheel feels comparable to that of the 
front wheel.

1

2

Summary of Contents for 22-15-2061












































































































































































































































































































Reviews:

No comments