Bosch Rexroth IPC, Connectivity Manual

Page: 17 / 99

IPC System Overview 2–5
1070 073 822-104 (02.06) GB
2.6 Standards compatibility
The IPC and IPC300 system components are certified to comply with the
following standards:
D
EN 60 204–1 Electrical systems on machines
D
EN 50 081–2 Basic specification for interference emission
(industrial environment)
D
EN 50 082–2 Basic technical standard, interference resistance
(industrial environment)
D
EN 60 742 Tranformer for 24 V power supply, protective se-
paration
D
EN 60 950 Overvoltage category II
D
EN 61 131 Requirements w/ respect to 24 V outputs
D
EN 61 131–2 Requirements w/ respect to 24 V power supply
D
EN 418 Machine safety, Emergency-STOP devices
D
EN 60 529 Protection categories (incl. housings and instal-
lation compartments)
D
EN 60 068–2–6 Vibration test
D
EN 60 068–2–27 Impact test
D
.IS.114 “X-ray Radiation” Directive, as per Official Fede-
ral Gazette
.
The CE licensing requirements have been fulfilled for all IPC and
IPC300 shipped from the factory.
However, the subsequent insertion of additional expansion cards will
necessitate a supplementary CE certification.