Failure of the product due to contaminated air
NOTICE
●
The ambient air must not contain acids, alkaline solutions, corrosive agents,
salts, metal vapors and other electrically conductive contaminants in high
concentrations
●
The ambient air must be free of dust
●
Housing and installation compartments must at least comply with degree of
protection IP 54 according to DIN EN 60529
7 Standards
7.1 Standards used
Standard
Meaning
EN 60 61000-6-4
Generic standards - Emission standard (industrial environments)
EN 60 61000-6-2
Generic standards – Noise immunity (industrial environments)
EN 61558-2-6
Transformer for 24 V power supply unit, safe separation
EN 60664-1
Overvoltage category II
EN 60 529
Degrees of protection (including housings and installation compart-
ments)
EN 60 068-2-6
Vibration test
EN 60068-2-27
Shock test
EN 60721-3-3
Classification of ambient conditions, operation
EN 60721-3-2
Classification of ambient conditions, transport
EN 60721-3-1
Classification of ambient conditions, storage
UL 508
Industrial Control Equipment
Tab. 7-1: Used standards, Y-repeater
7.2 CE marking
7.2.1 Declaration of conformity
The electronic products described in the present operating instructions comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC directive 2004/108/EC
The electronic products described in the present operating instructions are in-
tended for use in industrial environments and comply with the following require-
ments:
Y-Repeater
Bosch Rexroth AG
Standards
DOK-SUPPL*-VAC*01*****-IT03-EN-P
9/33