A10VO PISTON PUMP MANUAL-MODULE 3A
Leakage Line
(Case Drain)
Leakage lines should be laid out so that the housing always remains filled with oil and the ingress
of air at the radial seal is prevented even during long periods of in-operation. The leakage line just
always enter the tank (Reservoir) below the minimum oil level.
Direction of Rotation
Is always defined as viewed on the drive shaft and indicated by a directional arrow. It is not
possible to change the direction of rotation of the drive without conversion of the pump.
Bosch Rexroth Canada Corp. 3426 Mainway Dr. Burlington, ON L7M 1A8
www.boschrexroth.ca
16/06/2006
Page 8 of 23