background image

IM2100DT-UL 

IMPORTANT 

SAFEGUARDS

To reduce the risk of fire, explosion, electric shock, or 

injury when using your ice maker, follow these important 

safety instructions:

1.  Before using check that the voltage power corre-

sponds to the one shown on the appliance nameplate.

2.  Do not remove any safety, warning, or product 

information labels from your ice maker. 

3.  Plug the ice maker into an exclusive grounded power 

outlet. No other appliance should be plugged into the 

same outlet. Be sure that the plug is fully inserted into the 

receptacle.

4.  This appliance must be grounded. It is equipped with 

a power cord having a grounding plug. The plug must be 

plugged into an outlet that is properly installed and 

grounded. 

5.  Avoid the use of an extension cord because it may 

overheat and cause a risk of fire. However, if it is neces-

sary to use an extension cord: 

1)Use only extension cord with grounding plug. 

2)The marked rating of an extension cord must be equal 

to or greater than the rating of this appliance.

3)It should be positioned such that it does not drape over 

the counter or tabletop where it can be pulled on by 

children intentionally. 

6.  Do not operate any appliance with a damage cord or 

plug or after the appliance malfunction or has been 

damaged in any manner. Return the appliance to the 

nearest authorized service facility for examination, repair 

or adjustment.

7.  If the supply cord is damaged, it must be replaced by 

the manufacturer or its service agent or a similarly 

qualified person in order to avoid a hazard. 

8.  Do not let cord hang over edge of table or counter.

9.  Do not place on or near a hot gas or electric burner, or 

in a heated oven. 

10. Place power cord in such a way it cannot be pulled on 

by children or cause a tripping hazard. 

11. Place power cord in such a way that it is not in 

contact with hot surfaces. 

12. The use of attachment not recommended or sold by 

manufacturer may cause fire, electric shock or injury.

13. Do not touch the evaporator when using the ice 

maker or making ice to avoid being suffer from frostbite. 

14. Do not immerse any part of the product in water. 

15. To disconnect, turn any control to “OFF”, then remove 

plug from wall outlet. 

16. Do not plug or unplug product with wet hands. 

17. Unplug the product before cleaning,maintaining and 

when not in use.

18. Do not use with water that is microbiologically unsafe 

or of unknown quality. 

19. Do not clean your ice maker with any flammable 

fluids. The fumes may create a fire hazard or explosion. 

20. Do not overturn the ice maker. If the ice maker is 

overturned accidentally, make it stand steadily for 2 hours 

before power it on again.

21. If the ice maker is brought in from outside in winter-

time, do not use for a few hours, allowing the unit to 

warm up to the room temperature before operating.

22. Never put flammable, explosive and corrosive articles 

Summary of Contents for M2100DT-UL









Reviews: