5
5
This section details the installation of your BOS DEVILLE 35 FCV fork.
First of all, remove the original suspension from your bike. To do this, please refer you to the original
manual of your bike.
To facilitate reassembly, locate the order of disassembly of parts and arrange them on
your worktop so as to quickly identify the location of each of them during reassembly.
Fitting your Deville onto your bike requires care and attention. For your safety, please follow
these following instructions.
Steer tube
Before cutting the steer tube, first take some measurements taking into account the total height
of the headset, the length of the frame’s head tube, the height of the stem, then add 5 to 10mm.
Calculate the length as below:
Length of the head tube of the frame + height of the complete h height of the stem + 5 to 10mm.
Never attempt to remove or replace the steer tube or stanchions independently from the crown.
Modifying the integrated crown, steer tube, or stanchions can cause an assembly failure. It is
mandatory to replace the complete assembly for important safety reasons.
Installing the front wheel
To assemble the front wheel, follow this procedure:
Release the pinch bolt on right side of the fork
1
.
Unscrew the axle
2
and remove it.
Install the wheel.
Insert the axle and screw it completely until it stops, do not
overtighten.
Screw the axle pinch bolt to lock the axle (Torque between
4
and
4,5
Nm).
To disassemble the wheel, follow these instructions in reverse.
ASSEMBLY
1
2
3
4
1
2
