May-19
Product Code: BTJ35TA
Made in China to TQB Brands Pty Ltd specifications
Page 3
Visit us at www.tqbbrands.com.au
SAFETY INSTRUCTIONS
WARNING
FAILURE TO READ THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE & PERSONAL
INJURY
Support load by appropriate means after
lifting
Do not exceed rated capacity
Centre load on the Truck Jack
Only use attachments and/or adapters
supplied with or sold specifically for the
Truck Jack
Only lift areas of the vehicle designated by
the vehicle manufacturer.
Use as lifting device only
Use only on hard, level surface
Do not modify Truck Jack
SAFETY OPERATING INSTRUCTIONS
This Truck Jack should be used for lifting and lowering only. The raised vehicle
should be supported on approved vehicle stands. No person should get any part of
the body under a vehicle that is supported by this Truck Jack.
Position the Truck Jack to only lift on the areas of the vehicle specified by the vehicle
manufacturer.
Use support stands – after lifting the vehicle always support the load with
appropriately rated vehicle support stands before working on the vehicle.
Do not overload this Truck Jack beyond its rated capacity. Overloading this Truck
Jack beyond its rated capacity can cause damage to or failure of the Truck Jack.
Use only on hard level surfaces capable of sustaining the load. Use on other than
hard level surfaces can result in jack instability and possible loss of load.
Centre load on Truck Jack saddle before lifting vehicle.
Off centre loads and loads lifted when the Truck Jack is not level can cause loss of
load or damage to the Truck Jack.
Keep hands & feet clear of the Truck Jack hinge mechanism & ground contact area
when lowering the load.
THIS TRUCK JACK IS A LIFTING DEVICE ONLY & IS DESIGNED FOR LIFTING PART OF THE TOTAL
VEHICLE. DO NOT MOVE OR DOLLY THE LOAD WHILST THE VEHICLE IS ON THE TRUCK JACK.
