Borri UPSaver 1000 kVa, Operating Manual, Page: 38 / 185

UPSaver installation and start-up
OMH44149 REV. C 25
The supporting base of the UPS must be designed to carry the UPS weight and to ensure its
steady and safe support.
Its carrying capacity must be adequate to the static loads indicated in the table below.
Weight
[kg]
Static load
[kg/m
2
]
Config. UPSaver

CB+CSB CB+DSB DB+CSB DB+DSB CB+CSB CB+DSB DB+CSB DB+DSB
Power module 570 1030
400 kVA I/O module 660 650 650 520 620 610 610 490
600 kVA I/O module 690 680 680 550 650 640 640 520
800 kVA I/O module 780 770 770 640 560 560 560 460
1000 kVA I/O module 1140 890 990 740 670 520 720 540
1200 kVA I/O module 1170 920 1020 770 690 540 740 560
1400 kVA I/O module
Contact the manufacturer
1450
Contact the manufacturer
560
1600 kVA I/O module Contact the manufacturer 1490 Contact the manufacturer 575
3.3.3 System layout and overall dimensions
Picture 13 – UPSaver power module