Borri UPSaver 1000 kVa, Operating Manual, Page: 26 / 185

UPSaver installation and start-up
OMH44149 REV. C 13

Never let a liquid or foreign body penetrate inside the device;

Never block the ventilation grates;

Never expose the device to direct sunlight or place it near a source of heat.
Special environmental conditions
The UPSaver UPS is designed for normal climatic and environmental operating
conditions as defined in the technical specification: altitude, ambient operating
temperature, relative humidity and environmental transport and storage conditions. It
is necessary to implement specific protective measures in case of unusual
conditions:

harmful smoke, dust, abrasive dust;

humidity, vapour, salt air, bad weather or dripping;

explosive dust and gas mixture;

extreme temperature variations;

bad ventilation;

conductive or radiant heat from other sources;

strong electromagnetic fields;

radioactive levels higher than those of the natural environment;

fungus, insects, vermin.
Use authorized personnel only
All transport, installation and start-up operations must be carried out by qualified and
trained personnel.
The installation of The
UPSaver
UPS must be carried out by authorized personnel, in
compliance with national and local regulations.
Do not modify the device
Do not modify the device in any way: this may result in damage to the equipment
itself as well as to objects and persons. Maintenance and repair must be carried out
by authorized personnel only. Contact the manufacturer for details of the nearest
service centre.
2.3.5 Electrical connection
The UPS connection to the AC power must be carried out in compliance with the current
regulations.
Make sure the indications specified on the identification plate correspond to the AC power
system and to the actual electrical consumption of all of the equipment connected.