Borri UPSaver 1000 kVa, Operating Manual, Page: 25 / 185

UPSaver installation and start-up
12 OMH44149 REV. C
2.3 SPECIAL SAFETY WARNINGS
2.3.1 General warnings
The
UPSaver
UPS is provided with various stickers with indications regarding specific
dangers. These stickers must be always well visible and replaced in case they are damaged.
The present documentation must be always available in proximity to the device. In case of
loss we recommend to request a copy to the manufacturer, whose details are available in the
“Contacts” section.
2.3.2 Personnel
Any operation on the UPSaver UPS must be carried out by qualified personnel.
By qualified and trained person we mean someone skilled in assembling, installing, starting
up and checking the correct operation of the product, who is qualified to perform his/her job and
has entirely read and understood this manual, especially the part regarding safety. Such training
and qualification shall be considered as such, only when certified by the manufacturer.
2.3.3 Transport and handling
Avoid bending or deforming the components and altering the insulation distances while
transporting and handling the product.
Undistributed weight
The weight of the UPS is not uniformly distributed. Pay attention when lifting.
Please inspect the device before installing it. In case any damage is noticed from the
conditions of the package and/or from the outside appearance of the equipment, contact the
shipping company or your dealer immediately. The damage statement must be made within 6
days from receipt of the product and must be notified to the shipping carrier directly. Should the
product need to be returned to the manufacturer, please use the original package.
Injury hazard due to mechanical damage
Mechanical damage to the electrical components constitutes a serious danger to
persons and property. In case of doubt regarding the non-integrity of the package or
of the product contained therein, contact the manufacturer before carrying out the
installation and/or the start-up.
2.3.4 Installation
The product must be installed in strict compliance with the instructions contained in the
technical back-up documentation, including the present safety instructions. In particular, the
following points must be taken into account:

The product must be placed on a base suitable to carry its weight and to ensure its
vertical position;

The UPS must be installed in a room with restricted access, according to the
EN62040-1 standard;

Never install the equipment near liquids or in an excessively damp environment;