Borri UPSaver 1000 kVa, Operating Manual, Page: 24 / 185

UPSaver installation and start-up
OMH44149 REV. C 11
System ratings related to the I/O module
The data indicated in the rating plate are related to the maximum power configuration
of the I/O module. Refer to the following paragraph for further information.
2.2.1 Actual power configuration
The UPSaver system is, by definition, a modular UPS, that can be initially configured for a
certain power, which can be increased at a later stage by adding power modules. The maximum
power cannot exceed the I/O module rating.
For such reason the rating plate is integrated with an additional section, which indicates the
possible system configurations, on the basis of the number of installed power modules (see
following picture).
The system test configuration is marked with a tick; the plate can be replaced in case of
increase (or decrease) of the UPS rated power, that is in case power modules are added or
removed.
200 kVA 400 kVA 600 kVA 800 kVA
   
Configurazione moduli di potenza - Power modules
configuration - Konfiguration leistungs-module
UPSaver GPU 800kVA - F13S09001
1000 kVA 1200 kVA 1400 kVA 1600 kVA
   
Configurazione moduli di potenza - Power modules
configuration - Konfiguration leistungs-module
UPSaver GPU 1600kVA - F17S12001
Picture 2 – Actual power configuration plates