Borri UPSaver 1000 kVa, Operating Manual, Page: 105 / 185

UPSaver installation and start-up
92 OMH44149 REV. C
5.6 STARTING-UP A POWER MODULE
Starting-up a power module from the "completely off" condition is possible by simply
following the indications given by the touch screen , according to the following procedure.
1) From
the Home page (flow diagram), press on the power module which is supposed to
be started.
Picture 106 – Identification of the module to start-up
2) The touch screen will show the module flow diagram, without any inscriptions.
3) Close the switch RCBx , related to the module in question, and wait for the green LED
which indicates that the mains is present to turn on.
Picture 107 – Power module flow diagram