manualshive.com logo in svg

Borg Locks BL2005, Parts List, Installation And General Information

Share
Download
Borg Locks BL2005 Parts List, Installation And General Information Download Page 1

Parts List

Keypad

Inside Handle

Neoprene seals x2

Spindles (Only one is used)

Surface lock keep

Morticed lock keep

Tweezers (For code changing)

Fixing bolts. 4 Supplied

Spare tumblers. 2 x Coded

2 x Uncoded

Code card

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

Please make sure you have received all 
the following parts:

BL2005

Summary of Contents for BL2005

Page 1: ...2 Spindles Only one is used Surface lock keep Morticed lock keep Tweezers For code changing Fixing bolts 4 Supplied Spare tumblers 2 x Coded 2 x Uncoded Code card 1 2 3 4 5 6 7 8 9 10 Please make sure you have received all the following parts BL2005 ...

Page 2: ...the end and also by turning the flat spindle in the latch cam Select the spindle to suit the thickness of the door Insert the spindle through the slot in the door and makes sure it engages the latch correctly See Diagram When fitting an inside handle to a left hand door the blue screw must go into the right hand hole and vice versa Your door is right handed if viewed from the outside the hinges ar...

Page 3: ...ing easily DO NOT CLOSE THE DOOR UNTIL YOU RE SURE THAT THE CODE WORKS DO NOT over tighten the fixing bolts This may cause distortion and poor operation Position the strike plate on the door so that it lines up with the flat of the latchbolt NOT THE PLUNGER Mark the inner and outer edges of the strike place and cut a 1mm rebate so that it fits flush with the surface of the door frame Drill or cut ...

Page 4: ...Lay the keypad on a table as shown on drawing below Turn the bolt handle towards the left Turn over the bolt as shown in the drawing below and replace the plate and screws removed earlier ...

Reviews:

No comments

Brands by name

Popular brands

Load more brands