37
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 631
www.borcadmedical.com
7.3 Manual setting of the CPR
Warning:
Caution
The CPR controller is marked with red information labels on both sides of the back
section. The labels are marked with CPR text.
During movement, the back support must be loaded (e.g. with the patient's weight).
To activate the function, use one hand to push the red lever in the specified
direction. Use your other hand to pull down the back section by the handle on
the back section. Keep holding the lever during this movement.
To reset the back section to its original position, use motoric positioning (activates via
hand control, side control panel or side rail panel).
