24
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 631
www.borcadmedical.com
product and a code including further information (serial number or batch ID and date of
manufacture).
•
Modifications to the birthing bed are forbidden.
•
The birthing bed is intended only for use by medical professionals and for woman
in labor (locked siderails and headboard as handles or functions buttons on inner
side of siderails for her higher comfort).
•
Bed maintenance cannot be performed while ME equipment is in use!
5.1 Electromagnetic compatibility
Bed is intended for hospitals except for near active HF surgical equipment and
the RF shielded room of a medical system for magnetic resonance imaging,
where the intensity of EM disturbances is high.
Bed has defined no essential performance.
List of used cables:
1.
Mains cable
, maximum length 6 m
Manufacturer instructions
– electromagnetic emissions
WARNING!
It is recommended to avoid the use of this device next to or in block with other
device, because it could lead to improper operation. If such use is needed,
this device and the other equipment should be under surveillance to verify
proper operation.
WARNING!
Use of the accessories, converters and other cables, than specified and
provided by manufacturer of this bed could lead to increase of
electromagnetic emission or lower the electromagnetic immunity of this bed
and lead to improper operation.
WARNING!
Mobile RF communication device (including end use devices like antenna
cables and external antenna) should not be used closer than 30 cm (12 inches)
from any part of this bed AVE2, including cables specified by manufacturer.
Otherwise this could lead to deterioration of functionality of this bed.
WARNING!
Do not overload the bed (SWL), respect the duty cycle (INT.) Maintenance in
order to maintain the basic safety with regard to electromagnetic disturbances
for the expected service life.
