EN
110
Functions and operation
www.bora.com
O
H
shown at 100% brightness: very high
temperature.
O
H
shown at 50% brightness: high temperature.
The display goes out after a sufficient cooling time
(temperature <55°C).
6.6.5 Safety shut-down
Cooktop extractor
The cooktop extractor switches to automatic mode
after 120 min if there has been no input or changes
to the power level.
Cooktops
Each cooking zone is automatically switched off
after a predefined operating time in which the power
level has not been changed. 3 levels are available to
set the time until safety shut-down.
O
Safety shut-down is preset to level 2.
O
The level can be changed in the user menu.
Power levels
Safety shut-down after hrs:min
Level 1
Level 2
Level 3
1
12:00
08:24
06:00
2
10:00
06:24
04:00
3
09:00
05:12
02:30
4
08:00
04:12
02:00
5
06:00
03:18
01:30
6
04:00
02:12
01:00
7
04:00
02:12
01:00
8
03:00
01:48
00:45
9
02:00
01:18
00:30
ßp
00:05
00:05
00:05
Tab. 6.9
Safety shut-down on the different power
levels
Heat retention
level
Safety shut-down after hrs:min
Level 1
Level 2
Level 3
12:00
08:00
04:00
Tab. 6.10
Safety shut-down of the different heat
retention levels
X
Switch the cooking zone back on if you want to
put the cooking zone back into operation.
6.6.6 Overheating protection
i
In the event of overheating, the cooktop
power is reduced or the appliance is switched
off completely.
The appliance is fitted with overheating protection.
The overheating protection can be triggered if:
O
cookware is heated up empty;
O
oil or fat is heated on high power;
O
a hot cooking zone is switched on again after a
power cut.
Whilst the overheating protection is active, one of
the following steps is taken:
O
the activated power setting is switched back to
the previous level;
O
the power setting P can no longer be switched on;
O
the set power level is reduced;
O
the cooktop switches off completely.
After a sufficient cooling period, the cooktop can be
used again in full.
